OVERHEAD CRANE

1.Capacity: 550T-700T
2.Span: ≤40m
3.Lifting speed: 0-1.0m/min(No load),0-0.5m/min(Load)
4.Traveling speed:0-4.5m/min(No load),0-3.6m/min(Load)
5.Launching speed: 0-3.6m/min
6.Allowable slope: ≤3%（L），≤2%（T）
7.Curve radius: ≥300m
8.Power: 480Kw
9.Working class: A3/M4

Product Description:

OUR OVERHEAD CRANE IN TEMBURONG BRIDGE PROJECT, BRUNEI

〓 EQUIPMENT PROFILE

HCR supplies custom made Overhead Cranes for casting yards. In most cases these cranes are used for reinforcement bar fabrication therefore the capacity required normally is not more than 20 tons. Similar to other Hoisting machinery below safety features are included.

1. Hoist secondary brake, spinning speed control, load encoder.

2. Operation data recording system.

Upon inquiry HCR can produce Overhead Cranes from 5tons up to 500 tons with various span lengths.

〓 PARAMETERS

No.	Item	Detail
1	Capacity	50-1000
2	Span	/
3	Lifting speed	0-1.0m/min(No load) 0-0.5m/min(Load)
4	Traveling speed	0-4.5m/min(No load) 0-3.6m/min(Load)
5	Launching speed	0-3.6m/min
6	Allowable slope	≤3%（L），≤2%（T）
7	Curve radius	/
8	Power	150Kw
9	Working class	A3/M4

〓 PROJECT CASES

The pictures below show our project in Hawaii, USA, the project name is Honolulu Rail Transit. We supplied 4 set of overhead cranes for this project.

Structural analysis and design review for three outdoor overhead cranes. The cranes share the same track and service a segment precasting facility for the Honolulu Authority for Rapid Transportation (HART) Rail Transit Project in Hawaii.

On the year of 2021, this project was featured on the cover of ASPIRE , a famous magazine published by the Precast/Prestressed Concrete Institute (PCI) in cooperation with the associations of the National Concrete Bridge Council in South America.